The concrete mixing station is divided into four parts: sand and gravel feeding, powder (cement, fly ash, expansion agent, etc.)
feeding, water and admixture feeding, transmission mixing and storage. After the mixer control system is powered on, it enters the human-machine dialogue operation interface, and the system initializes, including formula number, concrete grade, slump, production volume, etc. Each silo and measuring hopper are tested according to the weighing , The output signal is empty or full, prompting the operator to determine whether to start the mixing control program. Start the sand and stone belt motor to feed the material to the metering hopper; open the butterfly valve of the fly ash and cement tank, start the screw motor to transport the fly ash and cement to the metering hopper; open the control valve of the water tank and the admixture pool to make the water and the The agent flows into the metering hopper. After the metering meets the set requirements, the metering bucket door is opened, the ingredients enter the started mixer for mixing, and the mixer door is opened at the set time, and the concrete enters the mixer truck that has received the material.